Montana Code Annotated 2019

TITLE 50. HEALTH AND SAFETY

CHAPTER 74. BOILERS AND STEAM ENGINES

Part 3. Licenses

Engineer's License Classifications

50-74-303. Engineer's license classifications. (1) Engineers entrusted with the operation, care, and management of steam or water boilers and steam machinery, as specified in 50-74-302, are divided into five classes, including first-class engineers, second-class engineers, third-class engineers, agricultural-class engineers, and low-pressure engineers.

(2) Licenses for the operation of steam or water boilers and steam machinery are divided into five classifications in accordance with the following schedule:

(a) First-class engineers are licensed to operate all classes, pressures, and temperatures of steam and water boilers and steam-driven machinery with the exception of traction and hoisting engines.

(b) Second-class engineers are licensed to operate steam boilers operating not in excess of 250 pounds per square inch gauge saturated steam pressure, water boilers operating not in excess of 375 pounds per square inch gauge pressure and 450 degrees F temperature, and steam-driven machinery not to exceed 100 horsepower per unit, with the exception of traction and hoisting engines.

(c) Third-class engineers are licensed to operate steam boilers operating not in excess of 150 pounds per square inch gauge saturated steam pressure and not in excess of 150 horsepower per hour and water boilers operating not in excess of 160 pounds per square inch gauge pressure and 350 degrees F temperature.

(d) Agricultural-class engineers are licensed to operate steam boilers that operate not in excess of 150 pounds per square inch saturated steam pressure and that:

(i) are not operated for more than 6 months of the year; and

(ii) are not operated for purposes other than the harvesting or processing of agricultural products.

(e) Low-pressure engineers are licensed to operate steam boilers operating not in excess of 15 pounds per square inch gauge pressure and water boilers operating not in excess of 50 pounds per square inch gauge pressure and 250 degrees F temperature.

History: En. Sec. 3, Ch. 32, L. 1905; re-en. Sec. 1649, Rev. C. 1907; amd. Sec. 9, Ch. 30, L. 1913; amd. Sec. 2, Ch. 32, L. 1919; re-en. Sec. 2720, R.C.M. 1921; re-en. Sec. 2720, R.C.M. 1935; amd. Sec. 8, Ch. 225, L. 1971; amd. Sec. 26, Ch. 94, L. 1973; amd. Sec. 28, Ch. 182, L. 1975; amd. Sec. 11, Ch. 187, L. 1977; R.C.M. 1947, 69-1509(1), (2); amd. Sec. 14, Ch. 514, L. 1995; amd. Sec. 1, Ch. 392, L. 2003.